star icon
JMJ Wetsuits logo
YOUR CART
Front view of the JMJ One-Piece Fullsuit with Attached hood - black suit with royal blue trim Back view of the JMJ One-Piece Fullsuit with Attached hood- black suit with royal blue trim

Fullsuit with Attached Hood

A very warm and flexible suit for diving: the one piece design and single layer of neoprene offers the freedom of movement of a fullsuit, with an attached hood to prevent water from flushing down the back of the neck. The suit has a cross chest front entry zipper, which has proven to be the best way to integrate an attached hood into a one piece fullsuit design; it has no free ends and is relatively watertight. This cross chest zipper is easier to open and close, and allows for more stretch across the shoulders and back. This suit is very comfortable and great for cool conditions.

Our dive suits are made with durable dive-grade neoprene that has better “memory” than other types of neoprene, meaning it will resume its thickness, even after being compressed many times at dive depths. All seams are glued & blindstitched for durability and have Lycra bindings for flexibility. They are available in various thicknesses with your choice of interior Nylon lining or Neoskin, and have non-corrosive Vislon zippers with interior flaps underneath to prevent water from entering. Supratex knee pads and an interior key pocket come standard.

This wetsuit is custom-fit to your measurements for maximum warmth and comfort. All JMJ wetsuits are made to last and keep you warm for many dives to come.

Read more...
Choose Thickness
Thickness Price
7mm
5mm
3mm
Choose primary color
color: black
Choose accent color
color: black

Measuring Instructions

  1. Take your measurements using a cloth measuring tape and write them down. Have someone measure you if possible, otherwise you can measure yourself.

    Chest: the largest circumference around your chest - usually around nipple line. Measuree should lift arms out to side, place tape around chest, then lower arms to side. Make sure tape stays level around the back.

    Waist: the smallest circumference between your chest and buttocks; not where you would measure the waist for a pair of pants, but normally a couple of inches higher, just below the base of the rib cage. If your waist is larger than chest or buttocks, take largest circumference of waist area.

    Hips: The widest circumference of your lower hips. Be sure to keep the measuring tape level.

  2. Find your size on the chart starting with the Chest, then find the best size matching your Height, Waist and Hips

Or Add Options
  • Zippers
    • $35
      • A pair of 8" Vislon zippers that greatly ease entry and exit, and reduce strain on the seams.
    • $30
      • 8" Vislon zipper with exterior flap for relief without removing the suit.
    • $35
      • A pair of 8" Vislon zippers that greatly ease entry and exit, and reduce strain on the seams.
  • Pockets
    • $45
      • Bellows pocket on a JMJ Wetsuit
        Spacious pocket with room for larger items like a GoPro, compact camera, spare mask, multiple slates, measuring devices and more.
        Size: 8" tall x 8" wide
    • $30
      • Flashlight pocket on a JMJ Wetsuit
        Great for holding a penlight, dosimeter, glow stick, pencil, cotter pins or even a hot dog. Typically worn on the thigh or forearm.
        Size: 8" tall x 2 5/8" wide
    • $40
      • Square flat pocket on a JMJ wetsuit
        Flat low-profile pocket with no flap, popular with dive instructors for carrying slates without adding drag to the suit.
        Size: 8" tall x 10" wide.
    • $40
      • Neoprene knife sheath on a wetsuit by JMJ Wetsuits
        3mm neoprene sheath with a velcro strap that secures the plastic sheath.
    • $40
      • Large flat pocket with Velcro flap on a JMJ Wetsuit
        Low-profile flat pocket with larger opening, useful for large slates and more. Velcro flap keeps contents inside.
        Size: 10" tall x 7" wide.
    • $35
      • Small flat pocket with Velcro flap on a JMJ Wetsuit
        A low-profile pocket is popular with dive instructors and researchers. Great for holding slates or other flat objects. Velcro flap keeps contents inside.
        Size: 7" tall x 5.5" wide (at flap)
    • $50
      • Spare Air pocket on a JMJ wetsuit
        Designed to hold the 3.0 cubic foot Spare Air™ breathing cylinder, useful for out-of-air-emergencies.
        Size: 11" tall x 4.5" wide, 3mm neoprene.
  • Pads
    • $35
      • Elbow pad on a wetsuit by JMJ Wetsuits
        Protection from suit wear at the elbows.
    • $40
      • Gun pad on the chest of a wetsuit by JMJ Wetsuits
        Strong pad of 6mm N2 neoprene worn on the chest for spear gun loading relief.
    • $40
      • 3"x18" 6mm neoprene pad in center of back fills the curve of the back and cushions the spine.

Your Fullsuit with Attached Hood will ship within 10 business days of receiving your order.

Made in California